Just click one of the guns below.
A simple blog about the Kel-Tec P-3AT 380 semi-automatic pistol. Intended for sharing tips, tricks, and technique. By the way, P-3AT is pronounced "P380", cool name on Kel-Tec's part.
Monday, March 19, 2012
Friday, March 16, 2012
My theory: most Kel-Tec issues would disappear with.......
No doubt the Kel-Tecs are not the top of the line pistols, but they are certainly not the bottom of the line either, far from it in my opinion. I carry a Kel-Tec P-3AT daily and I completely trust it as I would any .380 (as I always have a big boy not far away in my truck (Glock 23)).
I see forum posts regularly about issues with Kel-Tecs, but I also think a common thread here is that they are not cleaned and lubricated well before the first shoot and regularly after each following shoot. Kel-Tecs do not like to be dirty or dry, that does not mean it is an undependable gun. It is up to us to keep our weapons immaculate, whether it is a Kel-Tec or a Kimber. I surmise that very few of us would have any FTF or FTE issues if our guns stayed cleaned and well lubed. As many have said on this forum, a little grease instead of oil, is a good thing on the slide grooves of a Kel-Tec (the opposite would be true on a Glock, they run better drier).
Secondly, if one always uses reputable, new, clean, brass ammunition I expect the same would hold true, very few FTE and FTF. Now I know that a Glock can perform with most any thing you put in it, but the Kel-Tec is more selective. Those of us that love the Kel-tec for a variety of reasons should consider this too.
With this said, I also know that there are some manufacturing failures, weak pieces that break, stress fractures, etc., but what manufacturer does not have these. All I am saying is the common FTF and FTE issues that give pause to some folks about Kel-Tecs might be a false impression and can be rectified by doing something we should do with all our guns.
Just my $0.02.
I see forum posts regularly about issues with Kel-Tecs, but I also think a common thread here is that they are not cleaned and lubricated well before the first shoot and regularly after each following shoot. Kel-Tecs do not like to be dirty or dry, that does not mean it is an undependable gun. It is up to us to keep our weapons immaculate, whether it is a Kel-Tec or a Kimber. I surmise that very few of us would have any FTF or FTE issues if our guns stayed cleaned and well lubed. As many have said on this forum, a little grease instead of oil, is a good thing on the slide grooves of a Kel-Tec (the opposite would be true on a Glock, they run better drier).
Secondly, if one always uses reputable, new, clean, brass ammunition I expect the same would hold true, very few FTE and FTF. Now I know that a Glock can perform with most any thing you put in it, but the Kel-Tec is more selective. Those of us that love the Kel-tec for a variety of reasons should consider this too.
With this said, I also know that there are some manufacturing failures, weak pieces that break, stress fractures, etc., but what manufacturer does not have these. All I am saying is the common FTF and FTE issues that give pause to some folks about Kel-Tecs might be a false impression and can be rectified by doing something we should do with all our guns.
Just my $0.02.
Tuesday, March 13, 2012
Practice Weapons Malfunction Drills
Here is a good article from the Firearms Talk blog on "Practice Weapons Malfunction Drills".
"So you depend on your semi-automatic pistol to save your life if needed, right? You researched your firearm, searched for holsters and accessories, and shoot and train often for accuracy and weapon manipulation, so you got all the bases covered. Unless you also include some sort of weapons malfunction immediate action drills, you could be planning to fail.
What do you do immediately if you have a weapon malfunction? "
Shine up that barrel.....
With a little effort, you can make your factory P-3AT barrel look a lot better. Take sandpaper in this order (320,400,600,800,1000,1500,2000) and sand for 2-4 minutes using a wetting agent (I used ballistol). Next use #0000 steel wool, again with the wetting agent (ballistol in my case) for a good 4 minute scrub. You will end up with a barrel that shines like a mirror.
Friday, March 9, 2012
The mag grip extension
I have heard several talk about the P-3AT mag extension, both pros and cons. I decided to give it a try and so far I like it. I am not sure it adds any functionality, but it does add some comfort and it looks classy.
The belt clip
Kel-Tec has a sweet little belt clip (or inside the boot clip) for the P-3AT which will also fit the Ruger LCP. Find it here.
Practice Weapons Malfunction Drills
Here is a good article from the Firearms Talk blog on "Practice Weapons Malfunction Drills".
"So you depend on your semi-automatic pistol to save your life if needed, right? You researched your firearm, searched for holsters and accessories, and shoot and train often for accuracy and weapon manipulation, so you got all the bases covered. Unless you also include some sort of weapons malfunction immediate action drills, you could be planning to fail.
"So you depend on your semi-automatic pistol to save your life if needed, right? You researched your firearm, searched for holsters and accessories, and shoot and train often for accuracy and weapon manipulation, so you got all the bases covered. Unless you also include some sort of weapons malfunction immediate action drills, you could be planning to fail.
What do you do immediately if you have a weapon malfunction? "
Monday, March 5, 2012
5 Concealable .380 Pistols $200 or less
Yes, this is a Kel-Tec P-3AT blog, but this is an interesting article that includes the P-3AT.
Saturday, March 3, 2012
Cool looking lasers for the P-3AT
A couple of nice looking lasers for the smallest .380 from Laserlyte and Crimson Trace. Anyone tried these?
The SML Ruger/Kel-Tec .380 will fit the Ruger LCP or the Kel-Tec P-3AT. Although a side mount, the reviews state that the P-3AT will still fit its holster.
A lot of good information here, including videos of how to install. Going price is $80-$95.
http://www.laserlyte.com/products/ck-amf
The SML Ruger/Kel-Tec .380 will fit the Ruger LCP or the Kel-Tec P-3AT. Although a side mount, the reviews state that the P-3AT will still fit its holster.
A lot of good information here, including videos of how to install. Going price is $80-$95.
http://www.laserlyte.com/products/ck-amf
Although the picture below is of a Ruger LCP, these two guns are practically identical twins, so it will look the same on a Kel-Tec P-3AT.
Crimson Trace also has a laser: http://www.crimsontrace.com/products/manufacturer/kel-tec-pistols
The LG-430 LASERGUARD® FOR KEL-TEC P3AT looks as cool as the Laserlyte, but is an under the gun model and costs over $200.
Subscribe to:
Posts (Atom)